AARON JACOB BRAY
Independence
Summary
- Focused, reliable, and dependable service technician with 13+ years of experience in performing repairs and maintenance on many fuel related components and systems to prevent failures and maximize performance. Specialist in running diagnostic tests, determining causes and solutions for problems and completing repair work. Focused on using technical documentation and instructions to verify proper use of procedures specific to each situation.
Overview
26
26
years of professional experience
1
1
Certification
Work History
Maintenance Coordinator
World Fuel Services
05.2019 - Current
- Enhanced communication between departments, facilitating prompt responses to maintenance requests and reducing delays in repairs.
- Monitored priorities and liaised between maintenance team and management, delegating tasks to complete on time.
- Managed vendor relationships for timely delivery of parts and services, ensuring smooth operations within the facility.
- Coordinated emergency response efforts during unexpected breakdowns, mitigating risks to personnel safety and production timelines.
- Oversaw equipment and parts inventory and tracked shipments to reduce stock shortages.
- Troubleshot complex issues efficiently, providing expert guidance to technicians in resolving problems quickly and accurately.
- Ensured compliance with safety regulations, conducting regular audits and addressing potential hazards proactively.
- Reduced maintenance costs through thorough analysis of repair needs and prioritization of tasks.
- Strengthened vendor relationships, negotiating favorable terms and ensuring high-quality maintenance services were received at best possible cost.
Service Technician
PB Hoidale
04.2013 - 05.2019
- Serviced retail and non retail gas pumps (pressure and suction systems), oil, grease, water, and transfer pumps to ensure expedient repair and minimal downtime.
- Explained findings to customers and outlined repair or service options.
- Followed work orders, technical drawings and procedures in delivering scheduled maintenance and service with minimal downtime.
- Adhered to safety protocols and policies to reduce workplace hazards.
- Demonstrated increased knowledge of company products and equipment.
- Repaired and performed troubleshooting for fluid meters, air compressors, and lubrication equipment.
- Performed maintenance duties and safely handled chemicals and solutions.
- Adjusted the original installation plan as required and ensured that installations complied with local codes and good operating practices.
- Gained knowledge of standard equipment, including manufacturer repair guidelines.
- Trained customer employees and managers on machine use and maintenance.
- Streamlined repair processes to ensure minimal downtime.
- Documented all changes and actions in computer-based tracking system.
- Evaluated systems according to predetermined checklist and noted issues.
- Diagnosed and troubleshot problems, fixing and restoring machines to peak performance.
- Facilitated maintenance team training procedures in alignment with company standards.
- Assisted team members with troubleshooting and diagnostics.
- Inspected equipment to diagnose operational issues.
- Performed troubleshooting procedures to assess causes of issues and deliver properly functioning turbines.
- Corrected issues with mechanical, electrical and hydraulic systems, enhancing performance and reducing recurrence of maintenance issues.
- Minimized risks and incidents by strictly adhering to regulations, safety rules and codes.
Brian's Auto | Auto Mechanic
Brian's Auto
05.2012 - 05.2019
- Initially responsible for the 1st inspection of the vehicle.
- Discuss concerns of the vehicle with the customer and shop owner.
- Diagnose vehicle problems and review them with the shop owner.
- Discuss repairs to be made and the costs of the repairs with the customer and the shop owner.
- Perform the repairs and do a thorough review of all procedures and parts used to make the repairs to ensure all work was done correctly.
- Follow-up with the customer to ensure the customer is satisfied with the repairs.
Service Manager
FedEx Ground
09.2003 - 08.2011
- Initially responsible for supervising the loading and unloading of 18 to 22 trailers at any given time.
- Given the additional responsibility of supervising the sorting, loading, and unloading of "smalls" (packages less than 12 inches by 14 inches by 12inches) by September 2004.
- Given the additional responsibility of managing the overall sorting, loading, and unloading operation for 120+ trailers by October 2004.
- Managed the staffing of 130+ employees to balance manpower with workload requirements.
- Managed package movement deadlines and volume levels using the Trailer Movement Schedule system.
- Enforced safety regulations.
- Scheduled employee vacations and maintained employee personal records on a daily basis.
- Interpreted company policy and briefed up and down the chain of command.
- Analyzed and resolved work problems, or assisted employees in solving work problems.
- Recruited, hired, trained staff, evaluated employee performance, and recommended or initiated promotions, transfers, and disciplinary actions.
Labor Technician
Ciggins Construction
12.2002 - 10.2003
- Responsibilities included fabrication and installation of distribution equipment.
Stock Clerk
Deluxe Check Printing, Lenexa KS
08.1998 - 08.2000
- As a Deluxe employee I was responsible for taking daily inventory of check stock to ensure enough stock was on hand to meet daily needs.
- I was forklift certified and had extensive training on Deluxe based computer systems to assist internal communications so stock levels were always sufficient.
Education
Highland County Community College
Highland, KSJohnson County Community College
Overland Park, KSEarth Science and Health Education
Emporia State University
Emporia, KSBusiness Leadership And Operation Management
Friends University
Wichita, KSOperations College Through FedEx Ground
Pittsburgh, PALeadership College Through FedEx Ground
Phoenix, AZSkills
- Troubleshooting and diagnostics of ATG systems
- Safety and compliance
- Preventive and reparative maintenance
- Power tool proficiency
- Hand tool knowledge
- Blueprints and schematics
- Maintenance and repair
- Electrical installation and repair
- Project estimation and bidding
- Testing and evaluation of fuel systems
- Underground and above ground piping and tank installation knowledge
- Line, tank, liquid metering test equipment
- Process improvement
- Construction management
- Customer service
- Troubleshooting ability
- New construction and renovation
- Diagnostics skill
- Inventory management
- Project Management
- Customer relationship management
- Budgeting
- Scheduling coordination
- Maintaining facilities
- Facility maintenance
- Work order management
Additional Information
- FedEx Ground The 3 "E" Award-Energy, Excitement, Enthusiasm! 2005
- FedEx Ground The MVP award for September of 2009
Certification
- Acurite pipeline tester
- OSHA 10 hr
- API Work safe
- SKF Lincoln pumps
- Omega Flex DEF-Trac
- Fuelmaster
- TMS200W Wireless
- Xerxes underground storage tank installation
- NOV fiberglass systems, Red thread 2, 3000L, and 3000LCX
- American Red Cross 1st aid & CPR
- Gilbarco Veeder-Root Technician
- GVR Technician Safety
- GVR Installer
- Franklin/Incon Install/Repair
- Franklin Fueling Systems-INCON level 1 EVO-install
- Franklin Fueling Systems-INCON level 2 EVO-program
- Franklin Fueling Systems-INCON level 3 FMS Electronic Line Leak Detection
- Franklin Fueling Systems-INCON level 4 EVO-Sump Test Operation
- Kansas-KDA- Calibration- Retail Fuel Dispenser, Bulk/Mass Flow Meters
- Kansas-Dept of Health & Environment licensed to Install, Remove, and Test underground tanks.
- Missouri-Missouri Department of Agriculture-Weights, Measures, and Consumer Protection
- Wayne Fueling Systems Certified Technician
- Wayne Fueling Systems-Wayne iX CAT
- Wayne Fueling Systems-Wayne iX Pay/SPM
- Wayne Fueling Systems-Wayne Fusion Site Automation Server (V2)
- Wayne Fueling Systems-Oracle ASO Technician Portal
- Wayne Fueling Systems-Wayne Remote Key Injection
- Wayne Fueling Systems/Dover-Wayne Dispenser
- Wayne Fueling Systems/Dover-Wayne Outdoor Payment
Timeline
Maintenance Coordinator
World Fuel Services
05.2019 - Current
Service Technician
PB Hoidale
04.2013 - 05.2019
Brian's Auto | Auto Mechanic
Brian's Auto
05.2012 - 05.2019
Service Manager
FedEx Ground
09.2003 - 08.2011
Labor Technician
Ciggins Construction
12.2002 - 10.2003
Stock Clerk
Deluxe Check Printing, Lenexa KS
08.1998 - 08.2000
Johnson County Community College
Earth Science and Health Education
Emporia State University
Business Leadership And Operation Management
Friends University
Operations College Through FedEx Ground
Leadership College Through FedEx Ground
Highland County Community College
Similar Profiles
Colleen MercilColleen Mercil
Sales Executive at World Fuel ServicesSales Executive at World Fuel Services
Vern HubbardVern Hubbard
Maintenance Manager at World Fuel ServicesMaintenance Manager at World Fuel Services
Prajjaval GuptaPrajjaval Gupta
Cloud Solutions Architect at World Fuel ServicesCloud Solutions Architect at World Fuel Services
Erron PalmatoryErron Palmatory
Sr. Scheduler, Supply and Distribution at World Fuel Services, Inc.Sr. Scheduler, Supply and Distribution at World Fuel Services, Inc.
KRISTEN WOTOWIECKRISTEN WOTOWIEC
Adjunct Professor- (School of Education and Counseling) at Cleveland State UniversityAdjunct Professor- (School of Education and Counseling) at Cleveland State University